 |
| Photo: DJI |
DJI has announced the Air 3S, an update to its existing dual-camera Air 3 model that upgrades the primary camera to a larger Type 1 sensor and adds features that promise to make the drone easier to operate at night. DJI is positioning the Air 3S as “perfect for travel photography.”
The main camera on the Air 3S gains a 50MP Type 1 (13.2 x 8.8mm) CMOS sensor and features a 24mm equiv. F1.8 lens. That’s an upgrade from its predecessor, which utilized a smaller Type 1/1.3 (4.8 x 3.6mm) CMOS sensor with a marginally faster F1.7 lens. The telephoto camera remains unchanged between the two models, using a 48MP Type 1/1.3 sensor and featuring a 70mm equiv. F2.8 lens.
In addition to stills, both cameras can capture up to 4K/120p or 4K/60p when shooting HDR. All video can be captured in 10-bit, even in regular color mode, and D-Log M and HLG modes are available. The maximum ISO has been raised to 12,800 (3200 when shooting D-Log M). However, DJI says the Air 3S includes a new, more advanced video encoding algorithm that reduces video file size by over 30% without compromising image quality.
DJI claims both cameras can capture up to 14 stops of dynamic range and says the new main camera should capture even more detail than the camera on its more expensive Mavic 3 Pro model.
 |
|
The DJI Air 3S is similar to its predecessor, the Air 3, but it gains a larger Type 1 (13.2 x 8.8mm) CMOS sensor on its main camera. Image: DJI |
Beyond the cameras, DJI has added several appealing features to the Air 3S:
A new Free Panorama mode enables users to create panoramic shots by stitching together images across a manually selected subject area. This works with either camera, but DJI suggests the best results will come from using the telephoto camera, which reduces distortion.
The Air 3S also includes features designed to make it easier and safer to fly at night, including Nightscape Obstacle Sensing, with the Air 3S becoming the first DJI drone to feature forward-facing LiDAR. Additionally, the drone includes downward-facing infrared sensors and six vision sensors (two each at the front, rear and bottom). According to DJI, this combination of sensors provides the Air 3S with “nightscape omnidirectional obstacle sensing,” which should allow the drone to automatically identify and navigate around obstacles for safer nighttime photography.
This technology also enables DJI’s next-gen Smart RTH (return-to-home) feature, intended to allow the drone to return safely to its takeoff location, even at night.
 |
|
The Air 3S is available with either DJI’s RC-N3 controller, which requires a smartphone to monitor the camera feed and aircraft status, or the RC 2 controller (above), which includes a built-in 700-nit 5.5″ 1080 screen. Image: DJI |
The Air 3S also includes real-time vision positioning and map construction technology, designed to allow the drone to memorize a flight path and to return safely when adequate light is available, even in areas without satellite coverage.
The new model also features DJI’s ActiveTrack 360 subject tracking but introduces a new subject focusing feature designed to keep a subject in sharp focus, even during manual flight or when a subject moves off-center. This should allow a pilot to focus on creative decisions like composition or camera movement while ActiveTrack keeps the subject in focus.
There are a few hardware specs worth noting as well. The Air 3S weighs 724g (1.6 lbs), just 4g more than its predecessor, and is rated for 45 minutes of flight time. It includes DJI’s O4 video transmission system that transmits 10-bit video at up to 1080/60p and 42GB of built-in storage. A new Off-state Quick Transfer feature allows files to be transferred from the drone to a smartphone or a computer even when powered off.
Finally, for the privacy-conscious, a new Local Data mode completely disconnects the drone from the internet, ensuring that all data stays only on the device. DJI likens this mode to airplane mode on a smartphone.
 |
|
The Air 3S is available in several packages. The Fly More combo shown above includes the RC 2 controller, ND filter set, two additional batteries (for a total of three), a charging hub, extra props and a shoulder bag, will retail for $1599. Image: DJI |
The charging hub that ships with the Air 3S supports PD fast charging and features a power accumulation function. It allows users to transfer the remaining power from several depleted batteries into the battery with the most remaining power – something anyone who has had to use drones in remote locations without a charging station is likely to appreciate.
Price and availability
The DJI Air 3S is available for purchase in several configurations: the drone with the RC-N3 controller, which requires a smartphone to monitor the camera feed and flight status, will retail for $1099. A Fly More combo with the RC-N3 controller, ND filter set, two additional batteries, a battery charging hub and shoulder back will retail for $1399. Finally, a Fly More combo with DJI’s RC 2 controller, which includes a built-in 700-nit 5.5″ 1080p screen, ND filter set, two additional batteries, charging hub and shoulder pack, will retail for $1599.
Author:
This article comes from DP Review and can be read on the original site.
