Fujifilm’s X and GFX Series Cams Get a Ton of New Updates

The year 2024 was a busy one for Fujifilm, with the Japanese multinational conglomerate releasing several new cameras and lenses into the greater filmmaking, video production, and hybrid digital content industry. And now 2025 is looking like it might be more of the same, as Fujifilm has teased some new cameras and gear to drop soon.

But, perhaps more notably for right now at least, Fujifilm has just dropped a huge bundle of firmware updates set to hit a wide range of the company’s X-series and GFX-series cameras. The updates will bring some new features, functions, and improvements to Fuji cameras, including the X-T5, X100VI, X-H2, X-H2S, X-T50, X-M5, GFX100S, and GFX100.

If you’re an owner, renter, or fan of any of the above, check out the latest firmware updates below and see about getting your Fujifilm camera (or cameras) updated today.

---

Fujifilm Firmware Update Details

As mentioned above, there’s a lot to cover here. And, to be honest, most of these updates are a bit mundane, with some minor bug fixes and function improvements. Still, if you want your Fujifilm cameras (or any cameras for that matter) to operate to the best of their abilities, then keeping them up-to-date helps keep your cameras running smoothly.

Here’s the full list of updates, along with links to download the latest firmware versions for each.

Fujifilm X-T5 Ver.4.20 (download here)

The firmware update Ver.4.20 from Ver.4.10/Ver.4.11 incorporates the following issues:

1. Exposure tracking during aperture movement gets smoothed when used with the XF16-55mmF2.8 R LM WR II.
   The above exposure tracking function is enabled under the following setting conditions.
   [Setting conditions] ・StillMovie mode ➔ Movie
   ・Shooting Mode ➔ Manual (M) Mode
   ・ISO ➔ Fixed Sensitivity
2. The “LINEAR” setting in “Focus ring operation” menu can now be set by the focus ring rotating angle.
   The above function is enabled when used with the following applicable lenses.
   [Applicable lenses] ・XF/XC series Prime lenses and zoom lenses
   Note: Interchangeable lenses with distance indicators (XF14mmF2.8 R, XF23mmF2.8 R and XF16mmF1.4 R WR) are not applicable.
3. A firmware bug is fixed that the settings will not be renewed in “CUSTOM SETTING” after camera is turned off and on when you save the following settings in “EDIT/SAVE CUSTOM SETTING”,
   [Settings] ・“ISO SETTING”
   ・Some of the “AUDIO SETTINGS” (ex. “MIC JACK SETTING”, “INTERNAL MIC LEVEL ADJUSTMENT”, “EXTERNAL MIC LEVEL ADJUSTMENT”, etc.)
4. A firmware bug is fixed that the camera does not turn on even if the power lever is on when a specific SD memory card is inserted.
5. A firmware bug is fixed that the “WRITE ERROR” occurs in rare cases after shooting when using specific SD memory cards.
6. A firmware bug is fixed that the camera freezes in rare cases during “CH HIGH SPEED BURST” shooting under the following specific conditions.
   [Settings] ・Shooting Mode ➔ CH HIGH SPEED BURST
   ・Shutter Type ➔ E-FRONT CURTAIN SHUTTER
   ・FLICKER REDUCTION ➔ ALL FRAMES
7. Other minor bugs are also fixed.

Fujifilm X100VI Ver.1.21 (download here)

The firmware update Ver.1.21 from Ver.1.20 incorporates the following issues:

1. The lens shutter movement count is reduced by modifying the open/close control of the lens shutter.
   The lens shutter does not move at the following operations, so that lens shutter open/close movement count will be reduced.
   ・At changing the mode/menu to “Playback mode”, to the “Setup menu” or to “USB mode”
   ・At connecting to application software, at switching the view angle in movie mode or at switching between still and movie modes
2. A firmware bug is fixed that the settings will not be renewed in “CUSTOM SETTING” after camera is turned off and on when you save the following settings in “EDIT/SAVE CUSTOM SETTING”,
   [Settings] ・“ISO SETTING”
   ・Some of the “AUDIO SETTINGS” (ex. “MIC JACK SETTING”, “INTERNAL MIC LEVEL ADJUSTMENT”, “EXTERNAL MIC LEVEL ADJUSTMENT”, etc.)
3. A firmware bug is fixed that the camera does not turn on even if the power lever is on when a specific SD memory card is inserted.
4. A firmware bug is fixed that the “WRITE ERROR” occurs in rare cases after shooting when using specific SD memory cards.
5. Other minor bugs are also fixed.

Fujifilm X-H2 Ver.5.20 (download here)

The firmware update Ver.5.20 from Ver.5.10/Ver.5.11 incorporates the following issues:

1. Exposure tracking during aperture movement gets smoothed when used with the XF16-55mmF2.8 R LM WR II.
   The above exposure tracking function is enabled under the following setting conditions.
   [Setting conditions] ・StillMovie mode ➔ Movie
   ・Shooting Mode ➔ Manual (M) Mode
   ・ISO ➔ Fixed Sensitivity
2. The “LINEAR” setting in “Focus ring operation” menu can now be set by the focus ring rotating angle.
   The above function is enabled when used with the following applicable lenses.
   [Applicable lenses] ・XF/XC series Prime lenses and zoom lenses
   Note: Interchangeable lenses with distance indicators (XF14mmF2.8 R, XF23mmF2.8 R and XF16mmF1.4 R WR) are not applicable.
3. A firmware bug is fixed that the settings will not be renewed in “CUSTOM SETTING” after camera is turned off and on when you save the following settings in “EDIT/SAVE CUSTOM SETTING”,
   [Settings] ・“ISO SETTING”
   ・Some of the “AUDIO SETTINGS” (ex. “MIC JACK SETTING”, “INTERNAL MIC LEVEL ADJUSTMENT”, “EXTERNAL MIC LEVEL ADJUSTMENT”, etc.)
4. A firmware bug is fixed that the camera does not turn on even if the power lever is on when a specific SD memory card is inserted.
5. A firmware bug is fixed that the “WRITE ERROR” occurs in rare cases after shooting when using specific SD memory cards.
6. A firmware bug is fixed that the camera freezes in rare cases during “CH HIGH SPEED BURST” shooting under the following specific conditions.
   [Settings] ・Shooting Mode ➔ CH HIGH SPEED BURST
   ・Shutter Type ➔ E-FRONT CURTAIN SHUTTER
   ・FLICKER REDUCTION ➔ ALL FRAMES
7. Other minor bugs are also fixed.

Fujifilm X-H2S Ver.7.20 (download here)

The firmware update Ver.7.20 from Ver.7.10/Ver.7.11 incorporates the following issues:

1. Exposure tracking during aperture movement gets smoothed when used with the XF16-55mmF2.8 R LM WR II.
   The above exposure tracking function is enabled under the following setting conditions.
   [Setting conditions] ・StillMovie mode ➔ Movie
   ・Shooting Mode ➔ Manual (M) Mode
   ・ISO ➔ Fixed Sensitivity
2. The “LINEAR” setting in “Focus ring operation” menu can now be set by the focus ring rotating angle.
   The above function is enabled when used with the following applicable lenses.
   [Applicable lenses] ・XF/XC series Prime lenses and zoom lenses
   Note: Interchangeable lenses with distance indicators (XF14mmF2.8 R, XF23mmF2.8 R and XF16mmF1.4 R WR) are not applicable.
3. A firmware bug is fixed that the settings will not be renewed in “CUSTOM SETTING” after camera is turned off and on when you save the following settings in “EDIT/SAVE CUSTOM SETTING”,
   [Settings] ・“ISO SETTING”
   ・Some of the “AUDIO SETTINGS” (ex. “MIC JACK SETTING”, “INTERNAL MIC LEVEL ADJUSTMENT”, “EXTERNAL MIC LEVEL ADJUSTMENT”, etc.)
4. A firmware bug is fixed that the camera does not turn on even if the power lever is on when a specific SD memory card is inserted.
5. A firmware bug is fixed that the “WRITE ERROR” occurs in rare cases after shooting when using specific SD memory cards.
6. A firmware bug is fixed that the camera freezes in rare cases during “CH HIGH SPEED BURST” shooting under the following specific conditions.
   [Settings] ・Shooting Mode ➔ CH HIGH SPEED BURST
   ・Shutter Type ➔ E-FRONT CURTAIN SHUTTER
   ・FLICKER REDUCTION ➔ ALL FRAMES
7. Other minor bugs are also fixed.

Fujifilm X-T50 Ver.1.12 (download here)

The firmware update Ver.1.12 from Ver.1.10/Ver.1.11 incorporates the following issues:

1. A firmware bug is fixed that the camera does not turn on even if the power lever is on when a specific SD memory card is inserted.
2. A firmware bug is fixed that the “WRITE ERROR” occurs in rare cases after shooting when using specific SD memory cards.
3. Other minor bugs are also fixed.

Fujifilm X-M5 Ver.1.10 (download here)

The firmware update Ver.1.10 from Ver.1.00/Ver.1.01 incorporates the following issues :

1. “SUPPORT WEBSITE” is added to the “USER SETTING” in the “SET-UP” menu.
   By scanning the QR code on the screen with your smartphone or other device, you can easily access firmware updates information, user manuals, FAQs and other content on the support page.
   Note: The link will connect to the Global site. To change the language, select from the settings icon in the upper right corner of the site screen.
2. A firmware bug is fixed that the settings will not be renewed in “CUSTOM SETTING” after camera is turned off and on when you save the following settings in “EDIT/SAVE CUSTOM SETTING”, [Settings] [Settings] ・“ISO SETTING”
   ・Some of the “AUDIO SETTINGS” (ex. “MIC JACK SETTING”, “INTERNAL MIC LEVEL ADJUSTMENT”, “EXTERNAL MIC LEVEL ADJUSTMENT”, etc.)
3. A firmware bug is fixed that the camera does not turn on even if the power lever is on when a specific SD memory card is inserted.
4. A firmware bug is fixed that the “WRITE ERROR” occurs in rare cases after shooting when using specific SD memory cards.
5. A firmware bug is fixed that the image loading speed gets slow when transferring images to “FUJIFILM XApp” using “SELECT IMAGE & TRANSFER” in the “PLAY BACK MENU” with a large number of shots.
6. Other minor bugs are also fixed.

Fujifilm GFX100S Ver.2.13 (download here)

The firmware update Ver.2.13 from Ver.2.12 incorporates the following issue:

1. A firmware bug is fixed that the blocky color noise appears on the monitor of the external recorder when connecting an external recorder with HDMI output set to “RAW” movie.

Fujifilm GFX100 Ver.5.12 (download here)

The firmware update Ver.5.12 from Ver.5.11 incorporates the following issue:

1. A firmware bug is fixed that the blocky color noise appears on the monitor of the external recorder when connecting an external recorder with HDMI output set to “RAW” movie.